Cleaning/Maintenance; Cleaning & Maintenance; Cleaning The Appliance; Storage - Parkside PNTS 1300 C3 - IAN 102791 Originalbetriebsanleitung

GB IE

Cleaning/Maintenance

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.

Cleaning the appliance

Never hose the appliance down
with water. Never use aggressive
cleaning agents or solvents. This
could damage the appliance.
• After use, empty the waste tank (
• Clean the waste tank with a damp cloth.
• Wash the foam filter (
warm water and soap, and allow to
dry. If necessary, wash with lukewarm
water and soap and allow to dry.
• Beat out the material filter (
• Replace the paper filter bag (
when full (see "Replacement parts/Ac-
cessories" for reordering).
• Tap the optionally available folded
filter and clean it with a brush or hand-
brush.

Storage

- For storage, wind the power
cord (9) around the retaining
bracket (8) on the back of the
device.
Fix the power supply cable using
the cable clip supplied (9a).
- Insert the separated vacuum
tubes (12) into the accessory
holder on the appliance feet (7).
10
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
6).
15) with luke-
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
16). rated, accurately graded and passed on
17) for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
- The attachment ports on the mo-
tor part serve as nozzle storage
( 4) or on the feets (7).
- Wind the vacuum hose (13)
around the device and plug
the handle section (14) into a
vacuum tube (12).
- Store the appliance in a dry
place and out of reach of chil-
dren.
Machines must not be disposed of
with household refuse.