Dmx Channel Mode; Cleaning And Maintenance - EuroLite LED TMH-30 MK2 Bedienungsanleitung

2 DMX channel mode

Control-channel 1 - Internal programs
Decimal Hexad. Percentage S/F
0 15 00 0F 0% 6%
16 75 10 4B 6% 29%
76 135 4C 87 30% 53%
136 195 88 C3 53% 76%
196 255 C4 FF 77% 100%
Control-channel 2 - Strobe
Decimal Hexad. Percentage S/F
0 9 00 09 0% 4%
10 255 0A FF 4% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The cooling-fan should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
S Blackout
S Internal program low speed
S Internal program medium speed
S Internal program high speed
S Music control
S Neutral
F Strobe-effect with increasing speed
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
Feature
34/35 00088984.DOC, Version 1.0