Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Sound-control:
Color-wheel:
Rotating gobo-wheel:
Static gobo-wheel:
Number of LEDs:
LED type:
Beam angle:
Maximum PAN-movement:
Maximum TILT-movement:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Accessory:
TPC-10 Coupler, silver
AG-15 4x1000mm Safety bond up to 15kg
XLR cable 3pin 3m bk
XLR plug 3pin 110 Ohm
Flightcase for 2x TMH-30/40/60
Please note: Every information is subject to change without prior notice. 16.12.2014 ©
100-240 V AC, 50/60 Hz ~
95 W
2/11/14
3-pin XLR
via built-in microphone
7 colors and open
6 gobos and open
8 gobos and open
1
30 W
14°
540°
270°
250 x 245 x 315 mm
7,8 kg
:
45° C
a
(steady state):
60° C
C
0.5 m
0.1 m
T 1 A, 250 V
No. 59006856
No. 58010364
No. 3022047N
No. 30208430
No. 31001080
35/35
00088984.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
