Dmx-Controlled Operation; Dmx-Mode; Dmx Protocol - EuroLite LED SLS-603 TCL + UVFloor Bedienungsanleitung

Dimming

DMX-CONTROLLED OPERATION

You can control the devices individually via your DMX-controller.

DMX-Mode

The device has two different DMX channel modes. The Control Board allows you, as described below, to
assign the DMX channel mode.
Addressing
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.
Press the MODE button until the display shows "Addr". Press ENTER to confirm.
Select the desired DMX Channel Mode 4CH/8CH and again press ENTER to confirm.
You can now set the desired address via the UP or DOWN buttons. Press ENTER once again to confirm.
Press the MODE button in order to return to the main menu.
Please, be sure that you don't have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain.
If several devices are addressed similarly, they will work synchronically.
Controlling:
After having addressed the LED SLS-603 TCL + UV Floor, you may now start operating it via your lighting
controller.

DMX protocol

4 channel mode
Channel:
1
Color Presets
C5 Red + Green
C6 Red + Blue
C7 Red + UV
C8 Green + Blue
C9 Green + UV
C10 Blue + UV
C11 Red + Green + Blue
C12 Red + Green + UV
C13 Red + Blue + UV
C14 Green + Blue + UV
C15 Red + Green + Blue + UV
0-100% for Auto mode, Sound mode and Color
dim 1 – dim9
presets
Value: Function:
000 - 009 No function
010 - 029 Red
030 - 049 Green
050 - 069 Blue
070 - 089 UV
090 - 109 Red + Green
110 - 129 Red + Blue
130 - 149 Red + UV
150 - 169 Green + Blue
170 - 189 Green + UV
190 - 209 Blue + UV
210 - 219 Red + Green + Blue
220 - 229 Red + Green + UV
24/27 00095594, Version 1.0