SOLIS BARISTA TRIPLE HEAT 1011 Bedienungsanleitung Seite 65

PROGRAMMING THE EXTRACTION TIME (SHOT VOL)
Programming the extraction time for 1 cup
Press the MENU button until SHOT VOL flashes in the display and 1CUP is stated.
Press the button to make the water flow through the brewing group.
Press the button again once the desired time has been reached.
The appliance beeps twice to indicate that the new brewing time for 1 cup has been
saved.
Programming the extraction time for 2 cups
Press the MENU button until SHOT VOL flashes in the display and 2CUP is stated.
Press the button to make the water flow through the brewing group.
Press the button again once the desired time has been reached.
The appliance beeps twice to indicate that the new brewing time for 2 cups has
been saved.
Note: By default, the amounts for 1 and 2 cups are defined by the extraction time.
Should you wish to determine the amount by precise volume data, please read the
chapter "Fine tuning your settings in the advanced menu" on page 141.
PROGRAMMING THE EXTRACTION AMOUNT (SHOT VOL)
Programming the extraction amount for 1 cup
Press the MENU button until SHOT VOL flashes in the display and 1CUP is stated.
Fill the filter insert in the portafilter with coffee powder and tamp it. Press the
button again to start the espresso extraction. Press the
desired amount of espresso has been extracted.
The machine beeps twice to indicate that the new amount for 1 cup has been saved.
128
button again once the
Programming the extraction amount for 2 cups
Press the MENU button until SHOT VOL flashes in the display and 2CUPS is stated.
Fill the filter insert in the portafilter with coffee powder and tamp it. Press the
button again to start the espresso extraction. Press the
desired amount of espresso has been extracted.
The machine beeps twice to indicate that the new amount for 2 cups has been saved.
PROGRAMMING THE EXTRACTION TEMPERATURE (SHOT TEMP)
Press the MENU button until SHOT TEMP flashes in the display. The currently set
extraction temperature is displayed (93 °C by default).
Press the ▼▲or ▲ arrow buttons to set the desired temperature, ranging from 86 °C
to 96 °C.
button again once the
129