Maintenance; General Notes; Maintenance Schedule - Ammann AVH 7010 Betriebsanleitung

5. Maintenance

5.1 General notes

Careful maintenance:
ð increased service life
ð increased function security
ð reduced downtimes
ð increased reliability
ð reduced repair costs
•
Observe the safety regulations!
•
Maintenance works should only be carried out when the
engine is shut off.
•
The engine and machine should be cleaned thorougly
before carrying out maintenance work.
•
Park the machine on a flat surface and secure it against
rolling away and slipping.
•
Ensure that operating materials and replaced parts are
disposed of safely and in an environmentally - friendly
way.

5.2 Maintenance schedule

Intervals
Works
Clean machine
1)
Check engine oil level
1)
Change engine oil
1)
Change engine oil filter
1)
Check air filter
1)
Change air filter element
1)
Change fuel filter
1)
Drain water (Fuel tank)
1)
Check suction air intake
Check, adjust the valve
1)
clearance
Check exciter oil level
2)
Change exciter oil
Check hydraulic oil level
2)
Change hydraulic oil
Change return filter element
2)
Change ventilation filter
Check rubber buffer
Retightened screw connections
1)
Observe the motor manual
2) Or annually
3) first time
daily 20 h
l
l
3)
l
3)
l
l
l
l
l 3)
l
2)
3)
l
l 3)
•
Before commencing work on any electrical equipment,
disconnect the battery and cover it with insulating
materials.
•
Do not exchange „PLUS" and „MINUS" poles on the
battery.
•
It is essential that short-circuits be prevented in cables
carrying current.
•
Before welding works on the machine put-off all
connections and battery cables.
•
Burn-out lightbulbs in indicator lamps should be
replaced immediately.
•
When cleaning the machine with a high-pressure water
jet, do not spray the electrical components directly.
•
After washing the components, blow-dry them with
compressed air in order to prevent surface leakage
current and corrosion.
50 h 100 h 250 h
l
l
l
l
3)
l l
l
l
32
as
500 h 1000 h
required
l
l
3)
l l
l
l 3) l