Operation; Description; Overview Of Components; Before Operation - Ammann AVH 7010 Betriebsanleitung

3. Operation

3.1 Description

The AVH 7010 is a reversible vibrating plate operating on the
basis of the twin-shaft vibration system principle. The motor
drives the exciter on the baseplate via centrifugal clutch and
hydraulic components.
The exciter produces the vibration required for compaction
owing to the incorporated out-of-balance weights.
The machine is guided at the tow-bar grip. It is operated with the
operating controls on the tow-bar.
The AVH 7010 is suitable for all heavy compaction work in the
fileds of civil motorering and road construction.
It can be used to compact all ground materials such as sand,
gravel, slag, crushed stone, asphalt and composite sett paving.
Take great care on downslopes. The machine
could slip down owing to loose material or if the
surface is slippery.
Danger
Do not work on hard concrete or set asphalt
surfacing.

3.1.1 Overview of components

2 3
1
B6299205.cdr
1 Baseplate with exciter
2 Engine
3 Central-point suspension
4 Tow-bar
5 Operating controls / tow-bar

3.2 Before operation

Danger
Stand the machine on an even surface.
•
Check
-
-
-
-
-
•
Top-up any missing lubrication in accordance with the
lubrication table.
5
4
28
Wear personal sound of protection equipment -
Loss of hearing !
Observe the safety conditions.
Observe the operation
instructions.
Read the motor operating instructions. Observe
the Importants on
maintenance contained in them.
the motor oil level.
the hydraulic oil level.
the fuel supply.
that screw connections are secure.
the condition of the motor and the machine.
and maintenance
safety, operation and