c) Reading data Storage at the Meter
• Switch on the meter.
• Select the data view with the button "READ". The last slot recorded is displayed. Attention! If data recording is
running, the button "READ" will interrupt data recording.
• Every time the arrow buttons are pushed, you will choose the next-higher or next-lower memory slot.
• To end the data view push the button "READ" again.
d) delete data Logger
The data can be deleted in two manners:
1. via the menu in current operation. This procedure is described in chapter 7, Commissioning, item "Menu Pre-
Setting".
2. via a shortcut at activation.
• Switch off the meter.
• Keep the two buttons "CLEAR" and "POWER" pushed until the display shows "CLR DATA".
• Release the buttons when the regular measuring display appears. The meter switches off again.
• The data have been deleted.
• Switch on the meter; the memory can be used again.
• The empty memory is displayed in the display function "READ" with three dashes "- - -".
32