Install Software - VOLTCRAFT VBM-80 Bedienungsanleitung

Install Software

The meter has a serial USB interface (8) for data exchange with a computer. It is located at the upper housing side.
The interface is designed in the form of a device-specific socket and requires the enclosed data cable.
Place the enclosed software CD in the CD drive. The Auto Start wizard will start the installation program.
If the automatic installation does not start, select the included "exe" file by double-clicking with the mouse pointer.
Follow the instructions on the screen during installation.
After installation, restart your computer. Connect the meter to a free USB interface at your computer with the
enclosed USB data cable.
Use the menu Pre-Settings (Chapter 7. Commissioning item "Menu pre-settings") to activate the USB interface at
the meter.
The computer recognises a new device and installs the corresponding drivers.
Start the installed software via the Windows start menu – Programs – DMM.
®
The program starts. For a description of the software, see the software menu item "Help" - "Manual".
34