Intended Use - VOLTCRAFT VBM-80 Bedienungsanleitung

2. INTENdEd uSE

The vibration meter is used for mechanical measurement of machines and systems for maintenance and installa-
tion. It permits conclusions to the system condition such as concentric running, alignment errors or wobbly or loose
parts in the vibration frequency range from 10 Hz to 10 kHz.
The vibration sensor is offset from the meter and can be additionally attached to ferromagnetic metal housings with
a magnet. A data logger for recording measuring series is integrated. A USB interface permits further processing of
the measured data.
With average peak and max display and data hold function
The following measurements are available:
- Acceleration:
- vibration strength:
- vibration offset:
Operation requires a 9v block battery (type 1604A or same build). Measurement under unfavourable ambient condi-
tions is not permitted.
Unfavourable ambient conditions are:
- Wetness or high air humidity
- Dust and flammable gases, vapours or solvents
- Hot light sources
Any other use than that described above will damage the product.
No part of this product must be modified or converted!
Always observe the safety information!
All company names and product names are trademarks of their respective owners. All rights reserved.
0.1 – 199 m/s² (peak value)
0.01 – 19.99 cm/s
0.001 – 1.999 mm (peak-peak value)
23