Cleaning And Maintenance; Cleaning Stainless Steel Surfaces; Cleaning Enamelled Surfaces - NEFF F 3430 Serie Gebrauchsanleitung

Cleaning and maintenance

Cleaning stainless
steel surfaces
Cleaning enam-
elled surfaces
84
Before cleaning or carrying out maintenance,
switch off the power supply to the appliance
and close the gas tap.
Do not clean the surfaces of the appliance
when they are still hot.
Do not use pressure or steam spray guns to
clean the appliance. Risk of short-circuits!
To clean and preserve the stainless steel surfaces
and remove the toughest stains, always use spe-
cific products, provided they do not contain chlo-
rine-based abrasives or acid substances, or a
little warm vinegar.
Pour the product onto a damp cloth and wipe the
steel surface. Rinse carefully and dry with a soft
cloth or a piece of deerskin.
Do not under any circumstances use metallic
sponges or sharp scrapers that may damage
the surfaces. Only use non-scratch, non-abrasive
sponges and, if necessary, wooden or plastic uten-
sils.
Clean with a non-scratch, non-abrasive sponge
dampened with soap and water. Grease stains can
easily be eliminated with hot water or a product
specifically made for cleaning enamel. Rinse care-
fully and dry with a soft cloth or a piece of deer-
skin.
Do not use products containing abrasives,
scouring pads, steel wool or acid, which may
spoil the surfaces. Do not leave acid or alkaline
substances on the enamel (lemon juice, vinegar,
salt, etc.).