Fitting The Front Moulding; Fitting The Adjustable Feet - NEFF F 3430 Serie Gebrauchsanleitung

Fitting the front
moulding
Fitting the
adjustable feet
Your cooker features a front moulding which is
included as standard supply to complete the aes-
thetic lines of the cooker.
Before turning the cooker over, we recommend
removing all the parts that are not stably attached
to it, in particular the cooking hob grids and burn-
ers. To lighten the weight of the cooker, the acces-
sories inside the oven may also be removed, there-
by preventing accidental damage during the over-
turning operation.
To assemble, proceed as follows:
• Tilt the cooker backwards.
• Align the moulding A with the mounting position
as shown in the illustration.
• Apply the moulding until it fits into the mounting
position.
• Pull the moulding downward so that it hooks
onto the 4 pins B (2 for each end) present on
the cooker.
The cooker is delivered with the standard feet on
it. A kit of higher feet is also provided. Should you
need to replace the feet, before proceeding it is
necessary to turn the cooker over. This can be
done in one of two ways:
A Lifting the cooker off the floor.
B Laying the cooker on its back.
55