Fitting The Backsplash - NEFF F 3430 Serie Gebrauchsanleitung

Fitting the backsplash

56
Then proceed as follows:
1 Unscrew the standard feet
2 Take the other feet from the packing and screw
them onto the cooker
The final regulation of the feet to level the cooker
to the floor will be done after the gas and electric
hook-ups have been made.
Before turning the cooker over, we recommend
removing all the parts that are not stably attached
to it, in particular the cooking hob grids and burn-
ers. To lighten the weight of the cooker, the acces-
sories inside the oven may also be removed, there-
by preventing accidental damage during the over-
turning operation.
Should it be necessary to drag the cooker, screw
in the feet completely and carry out the final
regulation only when the other operations are
completed.
Your cookers features a backsplash which is
included as a standard supply. To assemble, pro-
ceed as indicated below. The cooker may also be
used without the backsplash.