HomeMatic HM-TC-IT-WM-W-EU Bedienungsanleitung Seite 61

• The antenna symbol (
teach-in time remaining in seconds. The teach-in time is
30 seconds.
• After a short time, the newly taught-in device will appear
in the inbox of your software interface. The button „Inbox
(x new devices)" indicates how many new devices have
been taught-in successfully.
• If required, you can teach-in additional devices by re-
peating the steps described above for each device.
• Now configure the newly taught-in devices in the inbox
as described in the next section „Configuring newly
taught-in devices".
Configuring newly taught-in devices
Once you have taught-in your room thermostat to the
Homematic Central Control Unit, it will be moved to the
inbox. Here, you must configure the device and its associ-
ated channels in order to make them available for operat-
ing and configuration tasks. Give the device a name and
assign it to a room. You can also make individual param-
) is displayed, along with the
Teach-in:
> 3 Sec.
61