HomeMatic HM-TC-IT-WM-W-EU Bedienungsanleitung Seite 55

multi-gang frame. In both cases, mounting with adhesive
strips and screws is possible. For mounting with multiple
combinations, make sure that the mounting plate (K) of
the room thermostat is seamlessly aligned to the already
fixed mounting plate/retaining ring.
The Homematic Room Thermostat is designed to fit into
frames supplied by the following manufacturers:
Manufac-
turer
Berker
ELSO
GIRA
merten
JUNG
If changes or works have to be made on the house
installation (e.g. extension, bypass of switch- or
socket inserts) or the low-voltage distribution for
mounting or installing the device, the following
safety instruction must be considered:
Only to be installed by persons with the
relevant electro-technical knowledge and
experience! (*1)
Frame
S.1, B.1, B.3, B.7 glass
Joy
System 55, Standard 55, E2, E22,
Event, Esprit
1-M, Atelier-M, M-Smart, M-Arc, M-Star,
M-Plan
A 500, AS 500, A plus, A creation
Start-up
55