Teach-In; Teaching-In To Homematic Devices - HomeMatic HM-TC-IT-WM-W-EU Bedienungsanleitung

9

Teach-in:

Please read this entire section before starting
the teach-in procedure.
Before being able to use your device with
QIVICON, it has to be taught-in to your
QIVICON Home Base. Therefore, please log-in to
„My QIVICON" at www.qivicon.com/login. There,
please select „Add device" and follow the instruc-
tions.
To integrate the room thermostat into your Homematic
system and enable it to communicate with other Home-
matic devices (e.g. Homematic Radiator Thermostat), you
must teach-in the room thermostat first. You can teach-in
the room thermostat directly to other Homematic devices
or to the Homematic Central Control Unit.
9.1

Teaching-in to Homematic devices

If you would like to teach-in the room thermostat to one
or more Homematic devices, you must put the devices to
be connected into teach-in mode and select the required
teach-in channel. To do this, proceed as follows:
During teach-in, please make sure you maintain a
distance of at least 50 cm between the devices.
• Activate the teach-in mode of your room thermostat.
Therefore, press and hold the boost button ( ) for at
least 3 seconds until the display switches back to teach-
in mode.
Teach-in:
57