Cleaning And Maintenance; Cleaning; Maintenance; Storage - Parkside PDSSE 450 A1 Originalbetriebsanleitung

GB IE
Cleaning and

maintenance

Disconnect the plug before any
work on the equipment. There is a
risk of injury.
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
10
Maintenance
Replacing carbon brushes
Switch the device off and remove
the mains plug.
Allow the device to cool down.
1. Loosen the service panel (6) with
a screwdriver.
2. Remove the service panel (6).
3. Pull the carbon brush (10) out of
the holder.
4. Slide a new carbon brush (10)
into the holder.
5. Re-attach the service panel (6).
6. Repeat
steps 1 to 5 on the other side of
the tool. Carbon brushes must
only be replaced in pairs.

Storage

• Store the trimmer in a dry place well
out of reach of children.
Disposal and protection
of the environment
Take the device, accessories and packag-
ing for environmentally friendly recycling.
Machines do not belong with
domestic waste.
• Return the unit to a recycling centre.
The plastics and metals in the unit can
be sorted and appropriately recycled.
Ask our Service Centre for details.
• Defective units returned to us will be
disposed of for free.