Basic Connection With A Coaxial Cable; Basic Connection With A Scart Cable; Advanced Connection; Connection With Audio Cable Rca Connectors - Strong srt 4356 pvr Bedienungsanleitung

Part 1 • English
great knowledge of the reception technologies, and requires specialized equipment.
Do not hesitate to ask any questions to your Strong dealer about installing your
receiver.
It is possible to connect the receiver through the use of UHF coaxial cables, SCART
cables, and/or so called Audio/Video cables with RCA connectors.
3.1.1 Basic connection with a coaxial cable (Please see inside cover Figure 4)
Connect the satellite signal from the LNB to the LNB D connector.
Connect the TV/VCR connector at the back of the receiver to the coaxial in
connector on your TV set.
Optional: connect an extra terrestrial or cable antenna to the ANT connector at
the back of the receiver.
3.1.2 Basic connection with a Scart cable (Please see inside cover Figure 5)
Connect the satellite signal from the LNB to the LNB D connector.
Connect the TV scart connector at the back of the receiver to the scart-in
connector on your TV set.
Optional: connect all extra terrestrial or cable antenna to the ANT connector at
the back of the receiver.
3.1.3 Advanced connection (Please see inside cover Figure 6)
Connect the satellite signal from the LNB to the LNB D connector.
Connect the TV scart connector at the back of the receiver to the scart-in
connector on your TV set.
Connect the VCR scart connector at the back of the receiver to the scart-in
connector on your VCR set.
Connect an extra terrestrial or cable antenna to the ANT connector at the back of
the receiver.
Connect a coaxial cable to the TV/VCR connector at the back of the receiver.
Connect the other end of this coaxial cable to the coaxial-in connector of your
VCR.
Connect the coaxial-out connector of your VCR to the video-in connector of your
TV set with a coaxial cable.
www.strongsat.com
Optional: Connect the audio left and right RCA-plugs (Red and White) on the
back of your receiver to the left and right input of an Audio amplifier, so you can
enjoy the excellent quality of the sound that is produced by your Strong receiver.
Note: If you have an audio amplifier with an optical input, use the S/PDIF output.
3.1.4 Connection with Audio Cable RCA Connectors (Please see inside cover
Figure 7)
On the back of your receiver find you will find the RCA connectors (Audio Left
&Right - Red& white, Video - Yellow)
Instal1 an audio/video cable between the RCA connectors of the receiver and
those of your TV set or amplifier.

3.1.5 Connection to a digital audio amplifier using the S/PDIF output

(Please see inside cover Figure 8)
Connect the S/PDIF out connector on the back of your receiver to the S/PDIF
input connector of your digital amplifier, using an optical fiber cable.
Do not forget to turn the S/PDIF function on (Main menu > Installation >PIN code
"1234"> TV/VCR Settings > SPDIF Output > On)
3.1.6 Connecting a serial cable for downloading software (Please see inside
cover Figure 9)
Connect the RS 232 connector on the back of your receiver to tile Serial port of
your computer using a serial cable.
Instructions
www.strongsat.com (support > downloads). However, this receiver can download
new system software automatically by satellite.
Aligning a satellite dish and LNB to the correct satellite position is a specialist job, and
can best be done by an official Strong dealer.
11 12
how to download software can be found on our website
Part 1 • English
www.strongsat.com