Connections; Connecting To Your Tv & Vcr - Strong srt 4356 pvr Bedienungsanleitung

Part 1 • English
Shows the list of available audio languages.
2. EPG
Shows the Electronic Program Guide during No-menu state only.
3. MUTE
Mutes audio output of the receiver.
4. Sound
Selects sound mode to either mono or stereo
5. FUNC
Used for special functions. Normally used for viewing information or starting scan.
6. SAT
Selects all satellites or one satellite to view.
7. POWER
Turns the receiver On/Off
8. UP/DOWN
Change the current program to the previous/next program in NO-menu state. Moves
the cursor upwards/downwards in Menu state.
9. LEFT/RIGHT
Increases/decreases the volume level in No-menu state. Moves the cursor to the
left/Right in Menu state.
10. OK
Activates the highlighted menu item.
11. MENU
Shows the menu or sub-menu and cancels any functions in progress if applicable.
12. EXIT
Exits from the menu or sub-menu and cancel any functions in progress if applicable.
13. VOL+/VOL
Adjusts the volume level.
14. CH+/CH-
Moves to the previous/next channel
15. TV
Shows the current digital TV program list.
16. Radio
Shows tile current digital Radio program list.
www.strongsat.com
17. FAV
Shows the current list favourite channels.
18. P-/P+
Channel UP/DOWN in No-menu state. Move the cursor UP/DOWN in menu-state.
19. NUMERIC KEY (0-9)
Controls the numerical operations and change channels directly.
20. SUB
Shows the list of subtitled languages the current channel supports.
21. REW
Rewinds the recorded program. (PVR mode)
22. PLAY
Shows the PVR menu and plays the recorded programs. (PVR mode)
23. STEP
Pauses the recorded program being played and plays it in steps,
24. FF
Forwards the recorded program. (PVR mode)
25. PAUSE
Freezes the picture on the TV screen and starts time timeshift recording of the current
channel.
26. STOP
Stops recording or playing a program. (PVR mode)
27. JUMP
Jumps forward/backward to the required location (5/10/20/30/60 min) (PVR mode)
28. REC
Records the current program

3.0 Connections

3.1 Connecting to your TV & VCR
Warning:
If you are not sure how to connect your receiver, do not take tile risk of doing it yourself
Ask your Strong dealer to do it for you. They are specially trained by our technicians
and can get the best performance out of your receiver. Although there are enthusiasts
who can do the installation of a satellite receiver unit themselves, it usually needs a
9 10
Part 1 • English
www.strongsat.com