Preview; Editing Program Name; Basic Functions - Strong srt 4356 pvr Bedienungsanleitung

Part 1 • English
5. To replay a program at a specific position, press the Jump button on your remote
control and the following figure will be displayed. (Please see inside cover Screen
36)
You can jump the time by 5/10/20/30/60 minutes, and can control the time lapse by
using the UP/DOWN keys on your remote control. You can even jump forward or
backward with the LEFT/RIGHT buttons on your remote.
6.2.2 Preview (Please see inside cover Screen 37)
In order to preview the recorded programs in the recorded programs list, please apply
the following steps:
1. Select the "Preview" option from the recorded programs list and the following PVR
preview is displayed on the screen.
2. If you press the Play button on your remote control, the selected program is
displayed on the PIG menu screen.
3. Navigate through the list by using UP/DOWN, LEFT/RIGHT buttons on your
remote control.
4. To stop the Preview status, press the STOP button on your remote control.
5. To jump to a play position and to change the jumping time value, use the
LEFT/RIGHT, UP/DOWN buttons on your remote control
6.2.3 Editing program name(Please see inside cover Screen 38)
You can edit the name of a recorded program by applying the following steps:
1. Press the Play button on your remote control.
2. In the PVR menu, use the UP/DOWN keys on your remote to select the program
you wish to edit.
3. Select the "Edit" option at the PVR menu state.
4. In the Edit menu, you can see an edit field and a keypad box and you can switch
between the edit field and the keypad box easily by using the RIGHT/LEFT buttons
oil your remote control.
5. Use P+ key to re-input all characters, and P- to delete one character in the edit
field. You can input characters from the keypad box.
6. Press EXIT to cancel edit or press OK on the edit field to confirm.
www.strongsat.com

7.0 Basic functions

While viewing TV or Radio channels various functions call be applied using your
remote control. Outlined is an explanation of the buttons on your RC and their
corresponding functions that can be performed while watching TV or listening to the
Radio. (See inside cover for the illustration of the remote control)
1. LANG (Language):
Shows the list of available audio languages for the channel you are watching. You can
change the audio language you want to hear by using the Up/Down keys, and pressing
the OK button.
2. EPG (Electronic Program Guide, Please see inside cover Screen 42)
EPG shows the event information on the current TP channel by time zone. EPG is
divided into Weekly mode, Daily mode and Extend mode. It provides timer based
recording and automatic power ON/Off The event is displayed only if the channel
supports EPG. If you press EPG, the Weekly mode is displayed as default.
Weekly (Red Button): The current TP channel list is displayed on the left, and
the event information is displayed on the right by time zone. (Please see
inside cover Screen 43)
Daily (Blue Button): If you want to display the Daily mode of the current
channel, press Blue (Daily). In the daily mode, the receiver shows the
designated channel in PIG, and displays the channel event in detail. (Please
see inside cover Screen 44)
Extend (Green Button): If you press the Green button, the receiver shows the
detailed information of the current event.
Timer (Yellow Button): Move the cursor to an event in the required time zone,
and press Yellow (Timer). The timer is then set to the designated time. See
"Timer Menu" (Described in section 5.1.3) for details of the timer.
Press EXIT to close the EPG menu.
3. MUTE:
Mutes audio output of the receiver.
4. SOUND
Sets the current channel audio to stereo ((.)), left-mono ((. or right-mono .)).Pressing
33 34
Part 1 • English
www.strongsat.com