Favourite Organizer Menu; The Timer Menu - Strong srt 4356 pvr Bedienungsanleitung

Part 1 • English
through the TV list in normal watching mode. Please apply the following steps:
1. Apply the first four steps detailed in "Change name of channel"
(Described in section 5.1.1).
2. Using UP/DOWN or P+/P- keys, select "Skip "field.
3. Press OK and enter your PIN Code.
4. The skip function will be marked.
5. Move your cursor to the OK field and press the OK button.
6. To unlock the channel repeat the procedure.
Change Video Package Identifier V-PID, Audio A-PID, Program P-PID Values:
1. Apply the first four steps detailed in "Change name of channel" described
previously.
2. Using UP/DOWN or P+/P- keys, select "P1D"field.
3. Using the numeric keypad 10-91, enter the new value.
4. Move your cursor to the "OK" field and press the OK button.
Deleting Channels from channel list
You can delete channels from the channel list by applying the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys, select "Channel Organizer" and press OK.
3. Press the Yellow (Delete) button
4. Using UP/DOWN or P+/P- keys on your remote, select the channel.
5. Press the Red button to delete the selected channel.
6. Press the Blue button to delete all channels from the list.
7. Press the Green Button to exit the delete menu
5.1.2 Favourite Organizer Menu (Please see inside cover Screen 6)
This menu enables you to organize your Favourite channels list. All the channels that
you have marked as your Favourite in the "Channel organizer" menu can be sorted by
applying the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys, select "Favourite Organizer" and press OK.
Sort Red button: Same as the Sort function of "Channel Organizer" menu.
NxtFav (Next Favourite Group) blue button: Shows the next Favourite group
www.strongsat.com
list.
Edit Green button: You can edit the name of the favourite group in the same
way as you change a channel name in the "Channel Organizer" Menu.
Remove Yellow button: Removes the selected channel directly from the
Favourite list that was selected.
5.1.3 The Timer Menu (Please see inside cover Screen 7)
The timer can automatically switch on or off your receiver at any time. This includes
timer based recording (PVR) and can also be used to wake you up at the time you set
it by applying the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys on your remote, select "Timer Menu" and press OK.
(Please see inside cover Screen 8)
Timer number: You can select up to 8 different events.
Timer State: Set to "Enabled" to use the timer function, or "Disable" to stop
the timer functions of the timer number you selected.
Timer mode: You can select the following functions in the timer mode.
1. "Power On ": The receiver powers on at the designated date and time.
2. "Power off": The receiver powers off at the designated date and time.
3. "Time interval": The receiver switches on at the designated date and time,
displaying the channel or playing a recorded channel and then switches off at
the designated date and time (The value set at the ending time).
4. "PVR Record": The designated channel gets recorded at the desired
starting time. A channel can be designated in the "Channel Organizer" menu.
The system prompts you before it stales recording. You can choose "cancel"
if you do not want to record. Recording of the designated channel stops at
the desired finishing time.
Timer Cycle: You can set the cycle of the action designated ill the timer mode
(one time, Every Day or Every Week).
Date: You can set the starting date of the timer action.
Time: You call set the starting time of the timer action.
Ending Time: You can set the ending time of the recording when the timer
mode is PVR record or Time interval.
17 18
Part 1 • English
www.strongsat.com