Parental Lock - Changing Pin Code - Strong srt 4356 pvr Bedienungsanleitung

Part 1 • English
7. Use your UP/DOWN buttons to go to field "Center" and use your Left/Right
buttons to put the center field to "On ".
8. Press OK, and your dish will move to the center position. It takes your dish
maximum 30 seconds to move to its central position.
9. To know in which direction you will need to move your dish, you will need to
know the position of the satellite you want it to position to.
10. If correctly installed, your installer has set the center position of your dish to
the South if in Northern hemisphere and to North if in Southern Hemisphere).
11. If for instance you want to set the position for Astra 19.20East, you know that
you will have to move your dish to the left using the Left button, If you want to
set the position for instance to Eutelsat 5
to move your dish to the right using the Right button.
To set the position of your selected satellite:
1. Use your UP/DOWN buttons to go to the "Movement" field.
2. Use your Left/Right buttons to have your dish turn towards the right direction,
and keep this direction button pushed in continuously. Once the receiver has
found the right position for the selected satellite, the word "Locked" will
appear above the signal level and quality indicator. To be sure you have the
strongest signal possible, press the direction you moved your dish in once
again, and look if the signal/quality improves. If this is not the case, move the
dish back one position, by pressing the other direction once.
3. If you are sure that you have the strongest signal/quality for the selected
satellite:
Use your UP/DOWN buttons to go to the "Save" field.
Use your Left/Right buttons to set to "On" and press OK. The position for the
selected satellite is now saved and your dish will move to this position, every
time a channel from this satellite is chosen.
Repeat this procedure for every satellite position and once you have complete the
settings:
Use Red (Auto Scan), Blue (Net. Scan), Green (TP Scan) or Yellow (PID) to search
channels.
www.strongsat.com
0
West, you know that you will have
27

5.1.4.4 Parental Lock - Changing PIN Code

This function changes the Personal Identification Number (PIN) that is used to control
access to the menu and individual channels. In this function, you can lock/unlock
channels and you can change your PIN code by applying the following steps:
To lock/unlock the menu, please apply the following steps: (Please see inside
cover Screen 10)
1. Press the menu button on your remote.
2. Using UP/DOWN keys on your remote, select "Installation" and press OK.
3. The receiver will ask you to put your PIN code. This PIN code is currently set to '
1234'.
4. Using UP/DOWN keys, select "Parental lock" and press OK.
5. Using RIGHT / LEFT keys, you can select either "lock" or "unlock" and press OK.
By selecting "lock", the receiver asks you to enter your PIN every time you want to
access the menu. By selecting "unlock" it gives you the possibility to access the
menu all the time without the receiver asking you for a PIN code.
To change your PIN code, apply the following steps: (Please see inside cover
Screen 21)
1. Press the menu button on your remote.
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Using UP/DOWN keys, select "Parental lock" and press OK.
4. Using UP/DOWN keys, select "Old PIN" and enter ' 1234'
5. Using UP/DOWN keys, select "New PIN" and enter a new PIN
6. Using UP/DOWN keys select "Verify PIN" and enter the same new PIN.
7. Press tile Blue button on your remote to save & Exit
8. Press the Exit button until you go back to main menu.
You are recommended to write down your new PIN code. In case you forget it,
you can reset your receiver to factory default settings but you will lose all information
you saved.
Your Personal PIN Code:
28
Part 1 • English
www.strongsat.com