Flash Techniques; Bounce Flash; Bounce Flash With A Reflector Card; Close-Ups / Macro Shots - Metz Mecablitz 64 AF-1 digital -Sony Bedienungsanleitung

13 Flash techniques

13.1 Bounce flash

Bounce flash illuminates the subject more
softly and reduces dense shadows. It also
reduces the drop in light from foreground to
background that occurs for physical reasons.
The reflector of the flash unit can be swivel-
led horizontally and tilted vertically for boun-
ce flash.
Tilting the reflector
• Press the release button
reflector from the lock while turning it to
the desired position.
+
The reflector is locked only in the normal
position .
To avoid colour cast in your shots, the reflec-
tive surface should be colour-neutral or whi-
k te.
When tilting the reflector vertically, make
sure that it is turned through an angle that is
wide enough to prevent direct light from fal-
ling on the subject. For this reason the reflec-
tor should be tilted at least as far as the 60°
lock-in position.
When the reflector head is tilted, the reflector
is moved to a position of 70 mm in order to
prevent the subject from being additionally
illuminated by dispersed light .
The range and position of the reflector is not
displayed.
202
and remove the
+

13.2 Bounce flash with a reflector card

The use of bounce flash with the integrated
reflector card can bring out highlights in
the eyes of human subjects:
• Tilt the reflector head upwards by 90°.
• Pull the reflector card together with the
wideangle diffuser from above out of the
reflector head and forwards.
• Hold the reflector card and push the
wide-angle diffuser back into the reflec-
tor head.

13.3 Close-ups / macro shots

In close-ups and macro shots, parallax error
between the flash unit and lens may result in
shadows on the lower edge of the image. To
compensate for this, the main reflector can
be tilted downwards by an angle of -9°. To do
this, depress the reflector release button
and tilt the reflector downward.
If the main reflector is tilted downwards, „
" is shown on the display to indicate this.
The second reflector is not supported and
does not flash.
Certain minimum lighting distances must be
maintained for close-up shots to avoid over-
exposure.