Setting The Flash Mode On The Master Flash Unit; Partial Light Output In M-Mode Settings On The Master Flash Unit - Metz Mecablitz 64 AF-1 digital -Sony Bedienungsanleitung

10.1.2 Setting the flash mode on the master
flash unit
TTL
REMOTE
• Press the sensor button on the touch
CTRL+
display for the mode as many times as it
CTRL RMT RMT2
takes for the mode to appear.
4 8 1
RATIO
MASTER O
• Press the
TTL touch display and select the mode of the
flash.
M
• Press the sensor button on the touch
EV
display for the desired mode of operation
p
q
TTL
or alternatively
M
REMOTE
1/1
CTRL+
CTRL RMT RMT2
4 8 1
The set mode of operation is adopted
immediately.
RATIO
REMOTE
CTRL+
CTRL RMT RMT2
sensor buttons on the
M
.
REMOTE
CTRL+
CTRL RMT RMT2
10.1.3 Partial light output in M-mode
settings on the master flash unit
Set the mode to
M
1/1
• Press the
display as many times as it takes for the
master selection to appear.
4 8 1
RATIO
MASTER O
• Press the
display for the partial light output.
TTL
M
P
O
P
1/4 - 2/3
• Press the sensor buttons
1/8
touch display to set the desired partial light
1/8 - 1/3
output.
p
q
• Press the sensor button of the selected par-
M
tial light output
1/8
4 8 1
The setting is adopted automatically.
RATIO
M
as described in 10.1.2.
M
sensor button on the touch
P
sensor button on the touch
on the
1/8
on the touch display.
183
k