Setting The Flash Mode On The Master Flash Unit; Partial Light Output In M-Mode Settings On; The Master Flash Unit - Metz Mecablitz 52 AF-1 Sony digital Bedienungsanleitung

10.1.2 Setting the flash mode on the master
REMOTE
TTL
CTRL +
• Press the sensor button on the touch
CTRL RMT RMT2
display for the mode as many times as it
1 1 1
takes for the mode to appear.
INFO RATIO
• Press the sensor button on the touch
TTL
display for the desired mode of operation
M
REMOTE M
CTRL +
1/1
The set mode of operation is adopted
CTRL RMT RMT2
immediately.
1 1 1
INFO RATIO
k
162
flash unit
TTL M
or alternatively .
10.1.2.1 Partial light output in M-mode
settings on the master flash unit
REMOTE M
CTRL +
1/1 Set the mode to
CTRL RMT RMT2
• Press the
1 1 1
display as many times as it takes for the
master selection to appear.
INFO RATIO
• Press the
TTL
display for the partial light output.
M
1/1
• Auf dem Touch-Display die Sensortasten
1/1
Teillichtleistung einstellen.
-1
1/1 /
3
• Press the sensor button of the selected
partial light output
1/8 -2 / display.
3
1/16
-1
1/16 /
3
The setting is adopted automatically.
REMOTE M
CTRL +
1/16
CTRL RMT RMT2
1 1 1
INFO RATIO
M
as described in 10.1.2.
M
sensor button on the touch
1/1
sensor button on the touch
drücken die gewünschte
1/16
on the touch