Cordless Flash Mode; Remote Slave Flash Mode ( Sl ) - Metz MECABLITZ 50 AF-1 digital Canon Bedienungsanleitung

Wide-angle diffuser
With the wide angle diffuser
12 mm or more can be illuminated (35 mm format).
Pull the wide-angle diffuser
reflector as far as it will go, and then release it.
The wide-angle diffuser
wards.
The main reflector automatically moves to the required position. The distance
readings and the zoom value are corrected to 12 mm on the display panel.
The automatic adjustment of the motor-zoom main reflector
activated if the wide-angle diffuser is in use.
To insert the wide-angle diffuser
in.
Mecabounce 58-90
If the Mecabounce 58-90 (optional accessories, see 17) is fitted to the main
reflector of the flash unit, the main reflector is automatically guided to the
position required. The distance data and zoom factor are corrected to 16 mm.
The automatic adjustment of the motor-zoom main reflector
activated if the Mecabounce is in use.
The simultaneous use of the wide-angle diffuser and the Mecabounce is
not possible.
, focal lengths of
out from the main
automatically folds down-
, turn it upwards 90° and push it all the way

9.2 Cordless flash mode

9.2.1 Remote slave flash mode (
The flash unit supports Canon`s wireless E-TTL Remote System in slave flash mode.
At the same time, one or more slave flash units can be remotely controlled from
one master or controller flash unit on the camera (e.g. mecablitz 58 AF-1/-2 C
digital).
A slave flash unit can be assigned to one of three possible slave groups
(GROUP A, B or C). The master or controller flash unit can control all of these
slave groups simultaneously and at the same time take the settings for each
is not
slave group into account.
So that multiple remote systems in the same room do not interfere with one
another, there are four independent remote channels available (CH 1, 2, 3 or
4). Master, controller and slave flash units belonging to the same remote system
must be set to the same remote channel. The slave flash units must be able to
receive the light from the master or controller flash unit with the integrated
sensors for the remote mode
Depending on the camera model, the camera's internal flash unit can
also function as master or controller flash unit. Please consult the respec-
is not
tive camera operating instructions for further tips on setting the master
or controller flash unit.
SL
)
.
93