Cordless Flash Mode - Metz Mecablitz 52 AF-1 Sony digital Bedienungsanleitung

10 Cordless flash mode

The flash unit supports the wireless Sony
remote system in the "CTRL" and "CTRL+"
modes, depending on the camera system
used. The "CTRL" and "CTRL+" modes are
automatically detected.
The remote system consists of a master
flash unit on the camera and one or more
slave flash units. The slave flash unit(s) are
controlled via wireless technology by the
reflector of the master flash unit. The slave
flash unit is assigned to one of two possible
groups (RMT or RMT2). Each group can in turn
consists of one or more slave flash units.
The master flash unit can control all of these
slave groups simultaneously and at the same
time take the settings for each slave group
into account.
k
The entire remote system can be operated
either with
synchronisation mode.
A change to the type of flash mode must be
made on the master.
160
TTL M
, or automatic high-speed
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
The slave flash units must be able to receive
the light from the master flash unit with the
integrated sensor for remote mode.
Remote flash mode also supports second
curtain synchronisation. In remote flash
mode, the maximum flash range is not
indicated on the flash unit's display panel.