Special Functions; Motor Zoom Reflector („Zoom") - Metz Mecablitz 52 AF-1 Olympus digital Bedienungsanleitung

+
After the shot, remember to cancel the TTL
flash exposure correction in the camera!
Strongly reflecting objects in the motif can
have a negative impact on the camera's
automatic exposure. The photograph will be
underexposed. Remove reflecting objects or
set a positive correction value.

9 Special functions

Depending on the camera model various
special functions are available.
For this purpose, data exchange must first
occur between the flash unit and camera to
access and set the special functions, for
example by tapping the shutter release.
The setting must occur immediately after
accessing the special functions since
otherwise the flash unit automatically
switches back to normal flash operation
after a few seconds!
9.1 Motor zoom reflector („Zoom")
The motor zoom reflector of the flash unit
can illuminate lens angles from 24 mm
(35 mm format).
Thanks to the use of the integrated wide-
angle diffuser , the illumination widens to
12 mm.
Auto zoom.
The zoom position of the reflector is auto-
matically adjusted to the lens focal length
when the flash unit is used with a camera
that transmits the data related to the lens
focal length. After the flash unit has been
switched on, „Zoom" and the current zoom
position of the reflector are shown in the
display.
k
147