6.4 Manual partial light output (P)
M
Setting procedure:
M
F 8.0
MZoom 35
17 m
P1/1
+
Para
–
+
M
F 8.0
MZoom 35
6,1 m
P1/8
+
Para
–
In strobe mode
, the maximum partial light output is automatically
adjusted to fit the flash parameters chosen.
In strobe mode
, reduction of the manual partial light output is only
possible in full intervals.
When the number of flashes (N) and the flash frequency (f) are reset, the
partial light output is not reset.
Para
–
7 Special functions (Select menu)
7.1 Setting procedure for the special functions
Sel
Sel
Select
Beep
Mode
Para
Sel
Table 2