Switching On And Off; Adjusting The Base Plate; Switching On/Off The Oscillating Function; Checking The Charge Status Of The Rechargeable Battery - Parkside PSSA 18 A1 Originalbetriebsanleitung

GB
ries and accidents.
After the device has been
switched off, the blade con-
tinues moving for some time.
Do not touch the moving
blade and do not attempt to
brake it. Danger of injury!

Switching on and off

Ensure your stance is stable and
hold the device tightly with both
hands and away from your body.
Before switching the device on,
ensure it is not in contact with the
work piece.
Switching on:
1. Ensure that the battery (11) is in-
serted (see "Removing/inserting
the battery").
2. Press the switch lock (9) and the
on/off switch (8), then release
the switch lock (9).
3. By using the on/off switch (8) you
can progressively control the stroke
rate.
Gentle pressure: low stroke rate.
Greater pressure: higher stroke rate.
The on/off switch cannot be
locked.
Switching off:
4. Release the on/off switch (8).

Adjusting the base plate

To adapt to the work piece, the base plate
can be adjusted and swivelled to 4 posi-
tions.
1. Press the adjusting button (5).
2. The base plate (2) can now be ad-
14
justed to the desired position. It can
now be felt locking into place.
3. The base plate (2) can be pivoted
by applying light pressure.
Switching on/off the oscillat-
ing function
To improve the progress of the sawing pro-
cess, an oscillating motion can be switched
on.
Sawing without oscillation:
- For thin, hard work pieces such as
wooden boards.
- In order to achieve cleaner cut edges.
Sawing with oscillation:
- For processing work pieces with medium
and soft strength, such as soft and hard
wood, tree wood, insulation material.
Switching on the oscillating
function:
1. Turn the rotary switch (6) to posi-
tion "1".
Switching off the oscillating
function:
2. Turn the rotary switch (6) to posi-
tion "0".
Checking the charge status of
the rechargeable battery
The state of charge display (11a) indicates
the state of charge of the battery (11).
Press the button (11b) on the bat-
tery (11). The state of charge of
the battery is displayed by illumi-
nating the 3-colour LED lights of
the state of charge display (11a).
All LEDs are on: Battery is fully
charged.