Introduction / Scope Of Supply - Unitest CHB 15 Bedienungsanleitung

True RMS measurement
3 / digit, digital LC-Display
3
4
with Bargraph
Manual Range select for Voltage-,
Current- and Resistance
measurements
Contactless Frequency
measurement
Clamp opening 23 mm
Data Hold
MIN/MAX-Value-Function
Zero-Adjust for Current
measurement DC
Relativ-Function
The UNITEST Clamp Meter CHB 15, CHB 35 and Clamp Adapter
CHB 10 are supplied complete with leads. After unpacking, check
that the instrument is complete, and that all accessories are present.
Important advice on safety matters, both on the instrument and
in the Instruction Manual:
WARNING !
Warns of a potential danger, observe the advice given in the
Instruction Manual.
DANGER ! Indicates a dangerously high voltage.
Symbol for the marking of electrical and electronic equipment
(WEEE Directive 2002/96/EC).
Conformity symbol, the instrument complies with the valid
directives. It complies with the EMC Directive (89/336/EEC)
and the Low Voltage Directive (73/23/EEC) with their valid
standards..
Scope of supply:
1 pce. UNITEST Clamp Meter CHB 15 or
1 pce. UNITEST Clamp Meter CHB 35 or
1 pce. UNITEST Clamp Adapter CHB 10
2 pce. test leads with probes (red/black)/
test leads with plugs (Clamp Adapter CHB 10)
2 pce. battery 1,5 V IEC LR6
1 pce. holster
1 pce. instruction manual
Further accessories, such as test leads, probes, connectors, etc.,
are listed in the UNITEST catalogue.
18
UNITEST UNITEST
Clamp Meter Clamp Meter Clamp Adapter
CHB 35 CHB 15
•
•
•
•
•
•
•
•
UNITEST
CHB 10
•
•
• •
•
•
•
•