Otto M1 Intro Bedienungsanleitung Seite 53

For more manageable transportation, e.g. in cars, the footrests can be swung outwards or be
entirely removed in just a few easy steps.
To swing away or remove the footrest, pull the handle to the rear (Fig. 7). The footrest with foot-
plate can then be swung away to the inside or outside by 90° (Fig. 8), or be swung away and
removed by pulling upward.
INfORMATION
During reassembly, ensure that the footrest locking device has engaged.
Transportation is greatly facilitated by the removable quick-release axles on the rear wheels (in-
cluded in the standard version).
To remove the rear wheels, press the quick-release axle button, as described in section 3. The
rear wheels can then be removed. (Fig. 1).
NOTICE
During assembly, confirm that all bolts engage in the corresponding bore holes and that the quick-release
axles of the rear wheels and casters securely lock into their axle housings. The rear wheels and cast-
ers must not be removable without the button being depressed! Check the function of the wheel locks.
7 8
53