Herunterladen Inhalt Inhalt Diese Seite drucken

Manually Finding The Outdoor Sensors; Graphical Display - Renkforce FT0100 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

13. Manually finding the outdoor sensors

Please observe the notes under item "Commissioning / outdoor sensor" for this.
Use this search if an already-present outdoor sensor no longer transmits any data.
• Select the desired channel with the button CHANNEL. The selected channel is displayed.
• Keep the button CHANNEL pushed for about 3 seconds until the reception signal for the radio signal of the outdoor
sensors appears.
• The sensor search for the selected channel will take approx. 3 minutes. Do not move the weather station and outdoor
sensor during this time and do not push any button.
• Once a connection has been established, the current values of the outdoor sensor are displayed. The reception symbol
is no longer displayed.
Reception symbol for channel search (1-8)
Use this search if you want to add a new outdoor sensor, if you want to remove an outdoor sensor or if several outdoor
sensors no longer display any values.
• Keep the button CHANNEL pushed for about 5 seconds until the reception signal for the radio signal of the outdoor
sensors appears.
• The sensor search takes about 10 minutes. Do not move the weather station and outdoor sensor during this time and do
not push any button.
• After the end of the search, the reception symbol will no longer be displayed.
Reception symbol
If the outdoor sensor or the outdoor sensors cannot be found in either search version, reset the weather station
by powering down the weather station entirely briefly (batteries and mains adapter).

14. Graphical display

The weather station stores measured values of the last 12/24 hours. To view the changes saved to the current values,
proceed as follows:
• Push the Taste "HISTORY" to display the corresponding values with the graphical display.
• The following measured value changes in the last 12/24 hours can be displayed.
- TEMP-IN:
Indoor temperature
- HUMI-IN:
Indoor humidity
- TEMPOUT: Outdoor temperature
- HUMIOUT:
Outdoor humidity
- BAROREL:
Barometric pressure
35

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis