Selecting Dab Channels Automatically; Selecting Dab Channels Manually; Setting Dab Drc (Dynamic Range Control) - Renkforce 2633082 Bedienungsanleitung

Format
Date

10.2 Selecting DAB channels automatically

Scan the whole DAB network in your area. The radio will tune to the first station
found after the scan is completed.
1. Press and hold the Info/Menu button to enter the DAB menu list.
2. Press the Tuning up/down button to select "Full scan".
3. Press the Select button to confirm the selection.

10.3 Selecting DAB channels manually

1. Press and hold the Info/Menu button to enter the DAB menu list.
2. Press the Tuning up/down button to select "Manual tune".
3. Press the Select button to confirm the selection.
4. Press the Tuning up/down button to scroll through the whole DAB channel.
5. Press the Select button to select the desired channel.

10.4 Setting DAB DRC (Dynamic Range Control)

Dynamic Range Control (DRC) can make quieter sounds easier to hear when your
radio is used in a noisy environment.
Note:
Not all DAB broadcasts support DRC.
1. Press and hold the Info/Menu button to enter the DAB menu list.
2. Press the Tuning up/down button to select "DRC value".
3. Press the Select button to confirm the selection.
4. Use the Tuning up/down button to select and enable a setting.
– DRC Off: DRC is switched off, broadcast DRC will be ignored.
– DRC High: DRC is set as sent by broadcaster.
– DRC Low: DRC level is set to 1/2 that sent by broadcaster.
38
Station format
Current date