Technical Data - VOLTCRAFT 1168801 Bedienungsanleitung

• P lace the protective cap on the probe tip when you are not using the product.
P lace the camera probe back in the provided storage case. Store the product in a dry,
clean, cool place.
CLEANING
Clean the product carefully, e.g. with a soft, clean cloth. If it is very dirty, use a cloth slightly
moistened with lukewarm clean water.
Do not apply too much pressure to the glass surface of the camera to avoid scratch marks
that negatively affect the image quality.
Never use aggressive cleaning agents or any chemicals at all for cleaning; these can lead not
only to discolouration, but can also damage the product.
DISPOSAL
E lectronic devices are recyclable material and do not belong in the household
waste.
P lease dispose of the device, when it is no longer of use, according to current statu-
tory requirements.
TECHNICAL DATA
Resolution . ................................................... 640 x 480 pixels
Image sensor . .............................................. CMOS
Lighting . ....................................................... 4 white LEDs
Illumination .................................................. automatic
White balance . ............................................. automatic
Lens coverage . ............................................ 54°
Depth of field ............................................... from 60 mm distance from the camera
Endoscope neck Ø ...................................... approx. 5.5 mm (at joint approx. 6.5 mm)
Min. bending radius ..................................... 45 mm
Range of motion for probe tip . ..................... Pivoting range via lever 110° each left/right
.....................................................................
Protection class ........................................... IP67 (endoscope neck and probe tip only)
Operating conditions . ................................... Temperature 0 °C to +45 °C
.....................................................................
Weight ......................................................... 185 g
Dimensions . ................................................. see graphic (dimensions in mm)
41
T urning range via turning handle 170° each left/
right
Ambient humidity 15% to 85%
107 910
1130 ±20
Legal notice
G
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
A ll rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
T hese operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.
37 34