Technical Data - VOLTCRAFT LSG-10 Bedienungsanleitung

11. Technical data

LSG-10B transmitter:
Output signal ....................................................125 kHz
External voltage measurement .........................12 - 400 V AC/DC
Frequency range ..............................................0–60 Hz
Display ..............................................................LC display
Operating voltage .............................................9 V block battery
Power input .......................................................Max. 18 mA
Auto-power off ..................................................Approx. 1 hour
Ceramic fuse ....................................................FF 500 mA H 1000 V (6.3 x 32 mm)
Over-voltage category ......................................CAT III 300 V, Impurity level 2
Operating altitude .............................................Max. 2,000 m
Working conditions ........................................... 0 to +40 °C
Storage temperature ......................................... -20 to +60 °C
Dimensions (L x W x H) ....................................130 x 69 x 32 mm
Weight ..............................................................130 g
LSG-10 receiver:
Detection depth ................................................ 0 – 2 m (One-pole measurement)
Display ..............................................................LC display
Operating voltage .............................................9 V block battery
Power input .......................................................Max. 40 mA
Auto-power off ..................................................Approx. 10 minutes
Operating altitude .............................................Max. 2,000 m
Working conditions ........................................... 0 to +40 °C
Storage temperature ......................................... -20 to +60 °C
Dimensions (L x W x H) ....................................192 x 61 x 37 mm
Weight ..............................................................180 g
50
<80 % RH (non-condensing)
<80 % RH (non-condensing)
0 – 0.5 m (Two-pole measurement)
0 – 0.4 m (NCV mode)
<80 % RH (non-condensing)
<80 % RH (non-condensing)