Herunterladen Inhalt Inhalt Diese Seite drucken

VOLTCRAFT CT-1 Bedienungsanleitung

Kabeltester
Vorschau ausblenden Andere Handbücher für CT-1:

Werbung

100 %
D
Impressum
Recycling-
Papier.
Diese Bedienungsanleitung ist eine Publikation von Voltcraft®, 92242 Hirschau,
Chlorfrei
Tel.-Nr. 0180/586 582 723 8.
gebleicht.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeglicher Art be-
dürfen der schriftlichen Genehmigung des Herausgebers.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung.
Änderungen in Technik und Art vorbehalten.
©
Copyright 2004 by Voltcraft®
100 %
recycling
paper.
GB
Imprint
Bleached
without
These operating instructions are published by Voltcraft®, 92242 Hirschau, Tel: 0180/
586 582 723 8.
chlorine.
All rights, including translation, are reserved. No reproduction is permitted without
the express written consent of the publisher.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical specifications and design of the product.
©
Copyright 2004 by Voltcraft®
F
Note de l'éditeur
Ce mode d'emploi est une publication de Voltcraft®, 92242 Hirschau,
Tél.: 0180/586 582 723 8.
Tous droits réservés, y compris la traduction. Toute reproduction, quel que soit le
type, est soumise à une autorisation préalable écrite de l'éditeur.
100%
papier
Cette notice est conforme à la réglementation en vigueur lors de l'impression.
Données techniques et conditionnement soumis à modifications sans aucun
recyclé.
préalable.
Blanchi
©
sans
Copyright 2004 by Voltcraft®
chlore.
GB
D
D
GB
F
Best.-Nr. / Item-No. / No de commande: 12 19 07
0820*04-04/IAl
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
Kabeltester CT-1
Cable tester CT-1
Testeur de câbles CT-1
MODE D'EMPLOI
F
Version 04/04

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für VOLTCRAFT CT-1

  • Seite 1 Imprint Bleached without These operating instructions are published by Voltcraft®, 92242 Hirschau, Tel: 0180/ 586 582 723 8. chlorine. Best.-Nr. / Item-No. / No de commande: 12 19 07 All rights, including translation, are reserved. No reproduction is permitted without the express written consent of the publisher.
  • Seite 2: Einführung

    Anwender auch schwierigen Aufgaben gerecht. Voltcraft® bietet Ihnen zuverlässige Technologie zu einem außer-ge- wöhnlich günstigen Preis-/Leistungsverhältnis. Wir sind uns sicher: Ihr Start mit Voltcraft ist zugleich der Beginn einer langen und guten Zusammenarbeit. Viel Spaß mit Ihrem neuen Voltcraft®-Produkt!
  • Seite 3: Bestimmungsgemäße Verwendung

    Bestimmungsgemäße Verwendung Le consommateur est tenu par la loi de recycler toutes les piles et Der Kabeltester CT-1 kann zum Prüfen von Kabeldurchgängen, Ka- accus usagés ; il est interdit de les jeter dans une poubelle belbelegungen und zur Terminierung von Thin Ethernet (BNC), ordinaire ! 10Base-T (UTP/STP), AT&T 258A, TIA 586 A/B, Token Ring ver-...
  • Seite 4: Mise En Service

    Une inversion des pôles a un endommagement de l’appareil pour conséquence ! Lieferumfang Contrôle des réseaux Coax (BNC, Thin Ethernet) Kabeltester CT-1 • Raccordez le socle BNC (1) du testeur de câble à une extrémité Remote-Einheit du câble à mesurer et refermez celui-ci avec le connecteur BNC Aufbewahrungstasche (8).
  • Seite 5: Description Du Produit

    Eine Falschpolung der Batterie führt unweigerlich zur Zerstörung des Gerätes!. Contenu de l'emballage Testen von Coax-Netzen (BNC, Thin Ethernet) Testeur de câbles CT-1 Télécommande • Verbinden Sie den BNC-Sockel (1) des Kabeltesters mit einem Sac de protection Ende des zu messenden Kabels und schließen Sie dieses mit Connecteur BNC dem BNC-Abschluss (8) ab.
  • Seite 6: Consignes De Sécurité

    Consignes de sécurité Entsorgung von gebrauchten Batterien/ Akkus! En cas de dommages dus à la non observation de ce mode d'emploi, la validité de la garantie est annulée ! Sie als Endverbraucher sind gesetzlich (Batterieverordnung) zur Nous déclinons toute responsabilité pour d’éventuels Rückgabe aller gebrauchten Batterien und Akkus verpflichtet;...
  • Seite 7 Elimination des piles/accus usagés ! ..........32 Entretien et nettoyage..............33 We are sure that: Your start with Voltcraft represents the beginning of a long and good collaboration. Elimination des déchets..............33 Caractéristiques techniques ............33...
  • Seite 8: Maintenance And Cleaning

    Prescribed Use Clean the exterior of the device with a clean, soft, lint-free, antistatic The cable tester CT-1 can be used for the control of cable passages, cloth without detergents containing chemicals or solvents. cable assignments and for the termination of Thin Ethernet (BNC), 10 Base-T (UTP/STP), AT&T 258A, TIA 586 A/B, and Token Ring.
  • Seite 9: Product Description

    If the BNC-LED (3) is illuminated this means that the cable is not OK. The cable tester has been developed for a fast on-site test. The cable tester CT-1 can be used for the control of cable passages, cable • Now activate the BNC Test button (2). If the...
  • Seite 10 Diese Bedienungsanleitung gehört zu diesem Produkt. Sie enthält wichtige Hinweise zur Inbetriebnahme und Handhabung. Achten Sie dar- auf, auch wenn Sie dieses Produkt an Dritte weitergeben. Bewahren Sie deshalb diese Bedienungsanleitung zum Nachlesen auf! This operating manual belongs to this product. It contains im- portant information on the commissioning and handling of the product.
  • Seite 11: Inhaltsverzeichnis

    Inhaltsverzeichnis Entretien et nettoyage Einführung ..................3 Pour le nettoyage à l'extérieur, prenez un chiffon propre, sec, non pelucheux et antistatique sans détergent abrasif, ni solvant ni produit Inhaltsverzeichnis ................4 chimique. Bestimmungsgemäße Verwendung..........5 Sicherheitshinweise ................. 5 Produktbeschreibung............... 7 Elimination des déchets Lieferumfang..................
  • Seite 12 Dieses Gerät hat das Werk in sicherheitstechnisch einwandfreien • Après le branchement du câble, la LED BNC (3) ne devrait plus être allumée. Au cas où la LED BNC (3) serait allumée, c’est que Zustand verlassen. le câble est endommagé. Um diesen Zustand zu erhalten und einen gefahrlosen Betrieb si- cherzustellen, muss der Anwender die Sicherheitshinweise und •...
  • Seite 13: Bedienelemente

    Bedienelemente Eléments de commande 1 BNC-Sockel 6 Power-Schalter 1 Socle BNC 6 Touche Power 2 BNC Test-Knopf 7 Remote-Einheit 2 Bouton de contrôle BNC 7 Télécommande 3 BNC-LED 8 BNC-Abschluss 3 LED BNC 8 Connecteur BNC 4 Power-LED 9 Optionale Testleitungen 4 LED Power 9 Conduites de câbles d'essai, en 5 Ground-Schalter (GND)
  • Seite 14: Testen Von Twisted Pair Verkabelungen

    • Schalten Sie den Kabeltester durch Drücken des Power-Schalters modifier la construction et/ou de transformer le testeur de câbles soi- (6) ein. Die blinkende Power-LED (4) zeigt die Betriebsbereit- même. schaft an. Seule une pile bloc 9V peut être utilisée pour l’alimentation en tension.
  • Seite 15: Reinigung Und Wartung

    Restrictions d'utilisation Zur äußerlichen Reinigung des Gerätes nehmen Sie ein sauberes, Le testeur de câbles CT-1 peut être utilisé pour tester des passages fusselfreies, antistatisches Reinigungstuch ohne scheuernde, che- de câbles, des affectations de câbles et pour la terminaison de Thin mische und lösungsmittelhaltige Reinigungsmittel.
  • Seite 16 Introduction ..................13 Table of contents ................14 Cher client, Prescribed use................15 En choisissant ce produit Voltcraft ®, vous avez choisi un Safety instructions ................ 15 produit d’une qualité exceptionnelle, ce dont nous vous Description of the product.............. 17 remercions vivement.
  • Seite 17: Disposal Of Used Batteries/Accumulators

    user must observe the security measures and the warning notations Disposal of used batteries/accumulators! ("Attention!" and "Note!") contained in this user´s manual. The following symbols should be taken into consideration: By law, the end-user is required (Battery regulation) to return spent batteries and storage batteries;...
  • Seite 18: Control Elements

    Control elements Commissioning Before commissioning, the intended use as well as the safety instructions and technical data should be observed. Before using the device, make sure that it is appropriate for its intended use. Battery mounting/changing If after a certain time the power LED loses its intensity, this means that the battery should be replaced.

Diese Anleitung auch für:

12 19 07

Inhaltsverzeichnis