Technical Data And Limit Values - VOLTCRAFT GT-6000 Bedienungsanleitung

14. Technical data and limit values

Display ..............................................................Liquid crystal display (LCD)
Ceramic fuse F1/F2 ..........................................16 A, 250 V, fast-blow (5x 20 mm), breaking capacity ≥500 A
Automatic shut-off .............................................1 minute
Power supply ....................................................6 AA or LR06 batteries, 1.5 V
Device tests ......................................................approx. 2500 tests with full batteries
Battery replacement indicator ...........................yes
Operating conditions .........................................0 to +30 °C (≤80% RH non-condensing)
Storage conditions ............................................-25 °C to +65 °C, max. 80% RH
Operating altitude .............................................max. 2000 m
Weight ..............................................................approx. 1030 g
Dimensions (L x W x H) ....................................277 x 124 x 68 mm
Measurement category .....................................CAT II 300 V
Pollution degree ................................................2
Protection class ................................................IP40
Measurement tolerances
Accuracy in ± (% of reading + display error in counts (= number of smallest points)). These accuracy readings are
valid for one year at a temperature of +23 °C (± 5 °C) and a relative humidity of less than 80 %, non-condensing.
The measurement may be impaired if the device is operated within a high frequency, electromagnetic field strength
>1 V/m.
Protective conductor resistance
Measurement range
0.05 Ω - 19.99 Ω
Test current: >200 mA (2 Ω)
Measurement voltage with open measurement circuit: 5 V
Pre-set limit value 0.3 Ω
68
230 V AC, 50 Hz
+31 to +40 °C (≤75% RH non-condensing)
Resolution
0.01 Ω
Accuracy
±(5% + 2)