Inhaltsverzeichnis
Werbung
W&T
unsigned int reserved[2];
}BOX_VERSION;
typedef struct _BOX_DESCRIPT
{
unsigned char mac_addr[6];
unsigned long IP_number;
unsigned long gateway;
unsigned long subnet_mask;
unsigned int
unsigned int
}BOX_DESCRIPT;
typedef struct _PORT_DESCRIPT
{ union
{ unsigned int wState;
struct _new_type
{ unsigned char port_type; // 0x01 = serieller Port (Serial CPU-Port)
unsigned char state;
};
};
unsigned int
unsigned long remote_IP;
unsigned int
}PORT_DESCRIPT;
typedef struct _WT_INTERN3
{
BOX_VERSION
BOX_DESCRIPT
PORT_DESCRIPT pd[ACT_PROCESS];
} WT_INTERN3;
#pragma pack()
230
// C5_100BT
// C6_INDUSTRY
// C8_LOW_VOLTAGE
// C8_WEB-IO
// ( 22 byte)
// MAC-Adresse des Com-Servers
// IP-Adresse des Com-Servers
// Gateway
// Subnet Mask
MTU;
// MTU
port_anz;
// Anzahl der Ports im Com-Server
// (port_anz * 10 byte)
// ( 10 byte )
// 0x02 = Serieller Port (UART Port)
// 0x03 = reserved
// 0x04 = Digital E/A
// 0x05 = Analog E/A (in Vorbereitung)
// 0x06 = W&T Dual Port RAM
// 0=free, 1=connect, 2=waits
mode;
// 0x0001 = TCP-Client
// 0x0002 = TELNET-Client
// 0x0003 = FTP-Client
// 0x0004 = Box2Box-Client (aktiv)
// 0x0005 = UDP Send/ReceiveMode
// 0x0006 = MULTI PORT (DPRAM, SERIAL PROTOCOL)
// 0x0007 = SNMP-Agent
// 0x0008 = Box2Box Server (passiv)
// 0x0010 = SLIP Router
// 0x0020 = PPP Router (in Vorbereitung)
// 0x0030 = Box2Box Bus System: Slave Box
// 0x0040 = Box2Box Bus System: Master Box
// wenn state == CONNECT, sonst 0
remote_port; // wenn state == CONNECT, sonst 0
// ** all parameters in Hostorder / Low Byte First **
bv;
// Port = UDP_BOX_INFO_8513
bd;
Inventarisierung
= 5.0 (0x0005)
= 6.0 (0x0006)
= 8.0 (0x0008)
= 8.1 (0x0108)
Werbung
Inhaltsverzeichnis
