Lighting Controls - Ransomes Commander 3520 Bedienungsanleitung

6 CONTROLS
6.15

LIGHTING CONTROLS

The Electrical switches are situated in a block of six
mounted on the left hand side of the operator.
A. MAIN LIGHTING SWITCH (A)
The main lighting switch is a three position rocker
switch. Position 1 is "off", position 2 is "side and
rear lamps", position 3 is "side, head and rear
lamps".
B. WASH / WIPE SWITCH (B)
The wash / wipe switch is a three position rocker
switch. Position 1 "wipe" and position 2 "wash /
wipe" with return to position 1. (Wash/wipe comes
with cab)
C. 2WD/4WD SELECTOR SWITCH (C)
The 2 wheel / 4 wheel drive switch is a two position
rocker switch. Position 1 engages 2WD for
transport and position 2 engages 4WD for cutting.
D. DIRECTION INDICATORS (D)
The direction indicators are operated by a three
position rocker switch. To operate the right hand
indicators depress the right hand side of the switch.
To operate the left hand indicators depress the left
hand side of the switch. The lamp D1 illuminates
when on.
E. HAZARD WARNING SWITCH (E)
The hazard warning switch is a two position rocker
switch which operates all four indicator lights at the
same time. The lamp D1 illuminates when on.
F. ROTATING BEACON SWITCH (F)
The rotating beacon switch is a two position rocker
switch and operates a beacon when fitted. The
switch illuminates when on. (Beacon is optional
equipment).
G. HORN (G)
A warning instrument is installed on the machine
and can be operated with the horn button situated on
the forward facing panel of the key switch housing.
H. 12 VOLT ACCESSORY SOCKET
10 amp rated
J. 12 VOLT ACCESSORY SOCKET
12 amp rated
SAFETY, OPERATORS & MAINTENANCE MANUAL
RANSOMES COMMANDER 3520
GB-17