Multi-Function Gauge; A Multi-Function Lcd Display - Ransomes Commander 3520 Bedienungsanleitung

6 CONTROLS

6.17 MULTI-FUNCTION GAUGE

WARNING LAMPS
A. Charge warning lamp colour red, on when
ignition is switched on and will go out once
engine has started. If the lamp comes on
when the engine is running, the fan belt
may be slipping or broken or a fault in the
electrical system is indicated and should
be investigated STOP IMMEDIATELY.
B. Engine oil pressure warning lamp colour
red, on when ignition is switched on, and
will go out once the engine has started. If
the lamp comes on when the engine is
running STOP IMMEDIATELY as this
indicates that the oil pressure is to low.
Check the level of oil in the engine sump
and if necessary top up. Check oil
pressure switch. Continued operation may
cause extensive damage to the engine.
C. Water temperature indicator colour red.
The water temperature gauge indicates the
engine coolant temperature. If the
temperature rises excessively, the lamp
will illuminate and the horn will sound,
check the coolant level in the radiator
expansion bottle and radiator. Also check
that the radiator mesh screen is clear of
debris.
D. Low fuel level indicator colour red, . The
fuel level indicator illuminates when the
machine needs refuelling.
E. Glow plug warning lamp colour red, this
lamp is timed on for a period of
approximately five seconds when the
ignition switch is turned clockwise to the
preheat position. Once the lamp has gone
out the engine can be started.
F. Parking Brake, coloured red is illuminated
when the parking brake is applied.
G. Blocked Charge Filter, coloured orange.
Illuminated when charge filter is blocked.
Change the filter as soon as possible to
avoid hydraulic component damage.
H. Service Required lamp, coloured orange
will flash when a service is required
SAFETY, OPERATORS & MAINTENANCE MANUAL
6.17a
The various functions can be selected using the left
hand button
The fuel level and engine coolant temperature is
displayed on a LCD bargraph in the upper segment
of the display. The clock, time to service and hour
meter is displayed in the lower segment of the
display in numeric format.
Fuel level
The bargraph, displays the amount of fuel left in the
tank.
Engine Temperature
The bargraph, displays the engine coolant
temperature.
Press the right button
two bargraph displays.
Clock
Displays time in 24 hour format
Hour meter
Displays total number of hours the engine has run.
Service Required
The numeric display shows the number of hours
before a service is required.
RANSOMES COMMANDER 3520
MULTI-FUNCTION LCD DISPLAY
to toggle between the
GB-19