Controls; Operator Presence Control (Opc); Landroll Clutch; Throttle Control - Ransomes Super Certes 51 Bedienungsanleitung Und Wartungsanleitung

6

CONTROLS

6.1

OPERATOR PRESENCE CONTROL (OPC)

By depressing button B Lever A can be operated
thereby engaging forward drive and cylinder rotation
(Cylinder will only rotate if Cylinder clutch is
engaged see 6.4).
When handle A is released, button B will spring
back into position, blocking the operation of Lever A.
6.2

LANDROLL CLUTCH

Pulling lever C towards the grip will disengage the
landroll clutch allowing the machine to be pulled
easily backwards when in confined areas. This
control is located on the left hand side of the
machine.
6.3

THROTTLE CONTROL

The maximum cutting speed can be adjusted by
means of this control. To adjust the engine revs.
move the hand lever E downwards to increase or
upwards to decrease the engine revs.
GB-22
RANSOMES SMALL PEDESTRIAN RANGE
SAFETY, OPERATORS & MAINTENANCE MANUAL
C
C
C
F
D E
F
D E
F
D E
B
A
B
A
B
A