Pc-Software - VOLTCRAFT V-CHARGE 300 TOUCH Handbuch

17. PC-SOFTWARE

First install the software (at least Windows XP or higher required) and the drivers of the
enclosed CD before connecting the charger to a computer.
For operation of the software observed, e.g., the corresponding information on the CD
or in the software's help function.
• Place the CD included in the delivery in the corresponding drive of your computer.
• If the installation programme does not start up automatically, open the table of contents of
the CD, e.g. with the file manager of Windows and start the installation programme manually.
• Follow all instructions of the software or Windows.
• Now connect the USB socket of the charger to a free USB interface of your computer via a
suitable USB cable (not included).
Windows recognises the new hardware and completes the driver installation. Windows may
then have to be restarted.
• Start the software. If any problems occur, try starting the software with Administrator rights.
• The charger can be controlled by software now.
If a new version of the software is available, you can find it on www.conrad.com in the
download area on the respective product website.
99