Herunterladen Inhalt Inhalt Diese Seite drucken

VOLTCRAFT V-CHARGE 300 TOUCH Handbuch Seite 61

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Choose a solid, flat, clean and sufficiently large surface for the charger. Never
place the charger on a flammable surface (e.g. carpet, tablecloth). Always use a
suitable, non-flammable, heatproof surface.
• Never cover the ventilation slots.
• Keep the charger away from flammable or easily inflammable materials (e.g.
curtains).
• Never block the function of the integrated fans. They will start up automatically.
• Do not place the charger on any valuable furniture surfaces without using a
suitable protection. Otherwise, scratches, pressure points or discolourations are
possible. The same applies to the rechargeable battery.
• Do not use the charger inside a vehicle.
• The charger must only be set up, used or stored in places that are not accessible
to children. Children may change the settings or short-circuit the rechargeable
battery/battery pack, which can lead to an explosion. Danger to life!
• Avoid installation in direct proximity of strong magnetic or electromagnetic fields,
transmitter aerials or HF generators. This can affect the control electronics.
• Ensure that the cables are not crushed or damaged by sharp edges. Never place
any objects on the cables.
• Do not place any containers filled with liquid, vases or plants, on or next to the
charger/mains cable. When these liquids get into the charger (or the plug con-
nections of the mains cable), the charger will be destroyed and there is a most
severe danger of potentially fatal electric shock or fire.
If the charger is operated via the mains cable, first switch off the mains voltage
for the mains socket to which the mains cable is connected (switch off the cor-
responding circuit breaker or take out the fuse, then switch off the fault interrupter
protection switch (FI circuit breaker) so that the mains socket is separated from
the mains voltage on all poles). Only then unplug the mains plug of the mains
cable from the mains socket.
If the charger is operated via the DC input (11 - 18 V/DC), disconnect the charger
from the voltage/power supply.
Then disconnect the connected rechargeable battery from the charger.
Do not use the charger again - bring it to a specialist workshop.
61

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis