Parts Included With The Fax Accessory; Attaching The Fax Accessory To The Mfp - HP mfp analog fax Handbuch

Parts included with the fax accessory

Attaching the fax accessory to the mfp

Note
Note
6 Chapter 1 Setting up
The following components are included in your package:
fax accessory with modem card installed
fax accessory mounting bracket
phone cord
power supply
power cord
parallel cables (2)
manual
support flyer
1 Unpack the fax accessory.
2 Make sure that the PCMCIA communications card is firmly seated.
Push on it slightly to make sure it has not come loose.
HP recommends using only the PCMCIA card that came with the fax
accessory to ensure that it functions correctly.
3 Make sure that the DIP switches next to the parallel port are in the
correct position, as shown below.
You will not be changing the position of these switches unless their settings
have been accidentally changed during shipping or rearranging.
,
ENWW