Specifying The Fax Settings; To Set The Country/Region Setting - HP mfp analog fax Handbuch

Specifying the fax settings

Note
ENWW
Before you can use the fax accessory, you must complete the following
tasks:
set the country/region setting
set the time and date
set your fax header
set rings-to-answer
When the fax accessory is installed for the first time, the settings must
be entered manually by the administrator by going into the menus.
In the U.S. and many other countries/regions, setting the time, date, and
other fax header information is a legal requirement.
If you ever need to change or edit these settings, you can use the
following instructions to access these settings using the control panel
menu.

To set the country/region setting

The country/region setting controls some of the fax options such as
time/date format and maximum rings-to-answer. To set or change the fax
country/region setting, follow these steps.
1 On the control panel, press the menu button to access the main
menu.
2 Select CONFIGURE DEVICE.
3 Select the FAX menu.
4 Select GENERAL.
5 Select COUNTRY/REGION.
6 Select your country/region.
Specifying the fax settings 15