HP mfp analog fax Handbuch Seite 21

Note
ENWW
3 In the Send Options screen, select Fax as the destination.
4 Place the first paper size document on the glass or in the automatic
document feeder (ADF).
5 Type the fax number using the numeric keypad on the mfp control
panel.
6 Depending on the MFP, either
• press the check mark button (4100 series) or,
• press SELECT (9000 series).
7 Press START to scan the document.
After the first paper size has been scanned, a popup screen displays on
the control panel. Do not press FINISH until all paper sizes for the fax job
have been scanned.
8 In the popup screen, choose the next paper size.
9 Place the next paper size document on the glass or in the automatic
document feeder (ADF).
10 Press START to scan the document.
11 Repeat steps 7 through 9 until all paper sizes have been scanned.
12 Press FINISH to begin sending.
Sending faxes 19