Specifying The Fax Settings; To Enter Text From The Control Panel; To Set The Time And Date - HP LaserJet 3330mfp Handbuch

Specifying the fax settings

Note
Note
14 Chapter 1 Setting up
Before you can begin using your product's fax features, you must
complete the following tasks:
Set the time and date
Set your fax header
Set the answer mode
Set rings-to-answer
Enable answer ring patterns, if needed
If you will be installing the product software on your computer, you can
skip the remaining instructions in this chapter. The software install will
automatically walk you through setting up the fax settings. See the getting
started guide for instructions.
In the U.S. and many other regions, setting the time, date, and other fax
header information is a legal requirement.

To enter text from the control panel

Use the following instructions to enter information from the product's
control panel with the alphanumeric keypad and the < and > buttons:
Numbers: To enter numbers, press the numeric button for the
number you need.
Letters: To enter letters, repeatedly press the numeric button for the
letter you need until that letter appears (for example, if the first letter
you need is a "C," press 2 repeatedly until a "C" appears in the
control panel display).
Punctuation marks: To enter punctuation marks, repeatedly press
* until the character you want appears in the control panel display.
Spaces: After entering any character, press > twice to create a
space after that character and move the cursor to an insertion point
after the space.
Errors: If you enter a character incorrectly, use the < button to
erase the incorrect character, then enter the correct character.

To set the time and date

To set or change the time and date, use the following steps. If you need
help entering any information, see
on page 14.
1 On the control panel, press menu/enter.
2 Using the < and > buttons, select Time/Date, Header, and press
menu/enter.
"To enter text from the control panel"
ENXC