HP mfp analog fax Handbuch Seite 9

ENWW
4 Remove the covering from the adhesive strip on the back of the fax
accessory mounting bracket.
5 Shut off the mfp before mounting and connecting the fax accessory.
6 Mount the fax accessory to a clean surface on the side of the mfp. If
installing the fax accessory on a smaller mfp, such as an
HP LaserJet 4100 mfp, the fax accessory should be installed on the
side of the mfp, as shown in the figure labeled "A" below. If installing
the fax accessory on a larger mfp, such as an HP LaserJet 9000
mfp, the fax accessory should be installed on the back of the mfp,
as shown in the figure labeled "B" below.
Attaching the fax accessory to the mfp 7