Autoscan; Activating The Mouse Manually; Terminating Command Mode - InfraTec Signum plus XB Handbuch

4
Operation
4.5.6

Autoscan

4.5.7
Activating the mouse
manually
4.5.8
Terminating
Command Mode
When this function is active, the Signum
automatically after a preset dwell time on each channel.
In a cascaded configuration, the autoscan can be activated in all cascade
levels.
• Switch the autoscan on or off with the
F11
• Pressing any button on the Signum
function in all levels.
The mouse must be activated manually in command mode if the keyboard is
OK, but the console mouse does not react.
• Press Scroll key on the
scroll
console keyboard once.
The mouse is activated.
• Press the left ctrl
mode is now disabled and the three LEDs above the numeric keypad
ctrl
stop blinking.
The console keyboard is now in normal input mode again and all inputs are
sent to the currently selected computer.
The three LEDs above the numeric keypad again indicate the status of the
related special keys on the console keyboard.
Signum
plus
XB changes the active channel
F11 key.
plus
XB interrupts the autoscan
key on the console keyboard once. The command
plus
XB
71